Like most industries, the architecture of buildings used for industrial or commercial applications varies according to the material being used. For example, many industries have specific standards that must be met for facilities. These may require a particular type of roofing system or at least mandate the kind of material that should be used.
Given the range of these requirements, manufacturing and other industrial areas use a wide variety of roofing systems, including common types such as:
1. Built-Up Roofing (BUR) Membrane
BUR is an industrial roofing system that is affordable, making it an excellent choice for low-cost buildings. A BUR membrane comprises an aggregate base and a water-resistant woven or nonwoven fabric covering the surface. The aggregate base is usually made from sand and gravel, while the material can be made from either polypropylene or fiberglass.
The main benefits of BUR are its low cost and fast installation time, but it also has some downsides: it doesn’t last as long as other types of roofing systems, and it doesn’t provide any insulation properties.
2. Metal Roofing
Metal roofing is commonly used in various buildings, including warehouses and factories. Metal roofing comes in many different styles, with some even offering a choice between flat and sloped roofs. Metal roofs are made from steel, or aluminum sheets joined together by fasteners or interlocking tabs. The sheets are then coated with either paint or an asphalt-based material called tar paper. These coatings protect the metal from corrosion caused by rainwater runoff and other environmental factors.
Because metal roofing doesn’t have to be painted regularly as other roofs do, it can last up to 50 years without needing to be replaced (depending on what type you choose). That makes it a great choice if you want something that will last for many years but doesn’t want to spend much money replacing it when it does eventually need repairs or replacement.
3. Modified Bitumen Roofing
Modified bitumen roofing is made of asphalt and rubber and has a higher heat resistance than other types of roofing. This makes it ideal for long-term installation in areas that receive sunlight or undergo extreme weather conditions.
The main benefit of modified bitumen roofing is its flexibility. You can apply it to almost any surface, including flat roofs and curved roofs. In addition, it’s easy to repair and replace when necessary.
The biggest downside of modified bitumen roofs is that they can be expensive to install, especially if you need an architect or engineer to help you with the design process. The other issue with this type of roofing is that it tends to wear out faster than different roofing materials.
4. Thermoset (EPDM) Roof Membrane
Thermoset rubber is the most common type of industrial roofing system. It is made from ethylene diene monomer (EPDM) rubber, mixed with a curing agent to create a thermoset material. This material cannot be remolded once it has been cured, making it ideal for use in harsh environments where repeated changes in shape are necessary.
There are many types of EPDM roof membranes that have been developed for different types of applications and environments. The two most common types are single-ply and reinforced membranes.
Single-ply membranes are generally used for lighter-duty applications such as roofs on warehouses or other commercial buildings. They are typically easy to install but may not last as long as reinforced membranes because they do not contain reinforcing fibers in their design.
Reinforced membranes consist of a single layer of EPDM rubber with reinforcing fibers woven into the material before curing. This type of membrane is more challenging to install than single-ply membranes because the fibers must be cut to fit the shape of each project’s unique design specifications; however, they are more durable than single-ply membranes and can withstand high temperatures.
5. Thermoplastic (PVC & TPO) Roof Membrane
Thermoplastic, or PVC, and Thermoplastic Olefin (TPO) are two of the most common industrial roofing membranes. For many years, these were the only options available. However, in recent years, other materials have emerged as viable options. Both PVC and TPO are lightweight, flexible materials that offer good wind resistance, fire resistance, and durability.
A thermoplastic roof membrane can be installed over an existing roof deck or constructed on an open deck. When installed over an existing roof deck, a waterproofing membrane must be installed first to protect the deck from moisture damage caused by water penetration through the surface of the thermoplastic material during installation.
Solid plywood or OSB roof deck is ideal for a thermoplastic roof system. This is because it provides a flat surface that can support heavy loads without bending or warping under pressure from snow loads; in winter months, when temperatures drop below freezing point at night, temperatures become lower than 32 degrees Fahrenheit (or 0 degrees Celsius).
roofer brentwood offer specialty products such as self-adhesive tapes with built-in UV inhibitors that help prevent prematurely.
6. Green Roofing System
Green rooftops are becoming more and more popular for industrial buildings, as they can help reduce energy costs and make the building more aesthetically pleasing. Green roofs can be made from various materials, including soil, gravel, or synthetic materials.
The most common types of green roofing systems are:
● Extensive
This is the simplest type of green roof, which uses only plants that have shallow roots, such as sedum and mosses. This type of system usually costs less than other types to install but requires maintenance throughout the year to prevent weeds from growing up through the plants or prevent damage from heavy rains.
● Intensive
An intensive system will typically have deeper root systems than an extensive system because it has an immense amount of soil. The deeper root system would help protect the building from strong winds or other weather events that might cause damage if there were no protection between them and the structure below it.
Conclusion
Ultimately, the type of roofing material you choose for your roofing project will be your choice. There are some general considerations to make, but as long as you fully understand the points made here, it should be an easy decision to make. With that said, when you are looking for roofing in Roanoke, VA, you can search online for experienced professionals.
AUTHOR NAME : ALISON LURIE